![\"\"](\"https:\/\/blog.innovation4e.de\/wp-content\/uploads\/2021\/11\/Graphical-Abstract.jpg\")
<\/a><\/figure>\n\n\n\nThe Utilization Phase<\/h4>\n
PV modules are designed to produce electricity for as long as possible. Currently, the module lifetime specified by most manufacturers is 25-30 years. Over this period, the module efficiency continuously decreases due to various environmental influences such as corrosion, the ingress of moisture or heat exposure. \u00a0These degradation effects impact the sustainability not only by reducing the energy balance but also due to alterations in the material properties. After being exposed to the elements for many years, the material properties of plastics and metals can change. These changes can have an impact on their recyclability at the end of life. Different design options, such as the use of frameless glass-glass modules, or the replacement of metals, such as silver and lead, can have a decisive influence on the sustainability over the entire life cycle.<\/p>\n
Incorrect handling can result in glass breakage or breakage of the laminate (consisting of a PV cell and its encapsulation), for example. Breakage can make it difficult or even impossible to separate the modules by type at the end of their life. Modules designed for longevity sometime conflict with module designed for sustainability (design-for-repair or design-for-recycling). The more durable a product design, the more stable the material composite. More stable designs can make it more difficult to recover individual materials. EcoDesign methods can be used to resolve these conflicting goals as sustainably as possible.<\/p>\n
PV Recycling<\/h4>\n
The return and disposal of PV modules at end of life is regulated in the EU by the WEEE (Waste of Electrical and Electronic Equipment) Directive. Today PV recycling usually takes place in metal and glass recycling plants, where aluminum, glass and copper are recovered. Specialized recycling, which allows for the recovery of metals such as silver and lead as well as the for the recovery of silicon wafers, is currently not economical due to low return volumes.<\/p>\n
Despite a mandatory recycling rate of 80%, the majority of these materials are lost. However, much is happening in research<\/a> and industry right now. Efforts are being made to be able to recycle the growing volumes of waste in the best possible way and thus further reduce resource and energy consumption over the entire life cycle of a module.<\/p>\n If one wants to evaluate the sustainability of a product in order to optimize it, then all phases within the product\u2019s life cycle should be considered singularly and interactively using a holistic approach. Aspirations aim at a circular economy in which PV modules are repaired, reused and recycled.<\/p>\nSustainability Assessment over the Entire Life Cycle<\/h4>\n
Further reading<\/h5>\n